Discussion:
[Bug 422536] Re: EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
(too old to reply)
doucetan
2009-10-31 22:34:59 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Committed

** Changed in: linux (Ubuntu)
Status: Fix Committed => Confirmed

** Also affects: linux
Importance: Undecided
Status: New
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
matangdilis
2009-10-31 22:52:22 UTC
Permalink
Problem also occurs in the following specs:

installation: 9.10 upgrade from 9.04 AMD 64
motherboard: ECS GeForce100PM-M2 with Phoenix -Award Workstation BIOS
vcard: inno3D Nvidia 7200 GS PCI-E
ram: non-ECC 2 GB
processor: AMD LE 1640
vdriver: nvidia 185 proprietary activated

Would compiling a custom kernel with ECC disabled (if it is possible)
work?
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
magia154
2009-11-01 03:15:43 UTC
Permalink
** Changed in: linux (Ubuntu)
Assignee: Andy Whitcroft (apw) => magia154 (magia154-gmail)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Strepto
2009-11-01 03:28:40 UTC
Permalink
Probably a kernel recompile would do the job, I'll try to do the
homework to see if it works
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Machiavelli
2009-11-01 08:55:16 UTC
Permalink
I do not suffer from this issue anymore. I'm running Nvidia driver
185.18.36.

I don't know what did it though.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Pete24v
2009-11-01 10:07:42 UTC
Permalink
I was running 9.04 totally fine, and 8.10 before, no issues like this.

Did a complete fresh install of Karmic and this error is happening all
the time. I have an AMD64bit processor and a MSi board with built in ATI
graphics. I'm using the suggested proprietary driver too.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Antolini
2009-11-01 11:13:37 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Committed

** Changed in: kerneloops (Ubuntu)
Status: Triaged => Fix Committed

** Changed in: linux
Status: New => Fix Committed

** Changed in: linux (Ubuntu)
Status: Fix Committed => Fix Released

** Changed in: kerneloops (Ubuntu)
Status: Fix Committed => Fix Released

** Changed in: linux
Status: Fix Committed => Fix Released
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Ian Sinclair
2009-11-01 11:24:31 UTC
Permalink
The ECC error notice appears when I try to print a photo from F-spot
(and the printout is rubbish).
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
trespasser
2009-11-01 13:11:33 UTC
Permalink
I see the fix is released but update manager didn't find it. How to get
it?

In my case the problem occurred just after restart. When the gnome
loaded it said the little thing showing if I'm online, offline, letting
me restart, shutdown my gear, etc. couldn't run and asked if I want to
remove it from my panel.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Shobuz99
2009-11-01 13:27:45 UTC
Permalink
In my case the problem began immediately after i upgraded to 9.10 from 9.04
I get an 'crash error' and it says kernel failure, or something..
I too, cannot get the fix from Update manager...

got any ideas?



________________________________
From: trespasser <cythrus at o2.pl>
To: shobuz99 at yahoo.com
Sent: Sun, November 1, 2009 8:11:33 AM
Subject: [Bug 422536] Re: EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.

I see the fix is released but update manager didn't find it. How to get
it?

In my case the problem occurred just after restart. When the gnome
loaded it said the little thing showing if I'm online, offline, letting
me restart, shutdown my gear, etc. couldn't run and asked if I want to
remove it from my panel.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a direct subscriber
of the bug.

Status in The Linux Kernel: Fix Released
Status in ?kerneloops? package in Ubuntu: Fix Released
Status in ?linux? package in Ubuntu: Fix Released

Bug description:
?

ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: yoman82 3464 F.... pulseaudio
/dev/snd/pcmC0D0p: yoman82 3464 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'SB'/'HDA ATI SB at 0xf9ff0000 irq 16'
Mixer name : 'Realtek ALC888'
Components : 'HDA:10ec0888,18491e01,00100001'
Controls : 37
Simple ctrls : 21
Date: Tue Sep 1 07:48:00 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=69c64130-cc6f-4a5b-952b-3ba4c893ba48
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
NonfreeKernelModules: nvidia
Package: linux-image-2.6.31-8-generic 2.6.31-8.28
PccardctlIdent:

PccardctlStatus:

ProcCmdLine: root=UUID=19f3bdd6-1b33-48e0-8081-d00e178d9f7d ro splash vga=792
ProcVersionSignature: Ubuntu 2.6.31-8.28-generic
RelatedPackageVersions:
linux-backports-modules-2.6.31-8-generic N/A
linux-firmware 1.16
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: 6.073813] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Uname: Linux 2.6.31-8-generic x86_64
WifiSyslog:

WpaSupplicantLog:

dmi.bios.date: 04/24/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P1.00
dmi.board.name: M3A780GXH/128M
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.00:bd04/24/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnM3A780GXH/128M:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
waterfull
2009-11-02 01:07:11 UTC
Permalink
Not upgrade to 9.10 from 9.04.
Just upgrade in 9.10.
Becasue of locking something.



?2009-11-01?Shobuz99 <shobuz99 at yahoo.com> ???
Post by Shobuz99
In my case the problem began immediately after i upgraded to 9.10 from 9.04
I get an 'crash error' and it says kernel failure, or something..
I too, cannot get the fix from Update manager...
got any ideas?
________________________________
From: trespasser <cythrus at o2.pl>
To: shobuz99 at yahoo.com
Sent: Sun, November 1, 2009 8:11:33 AM
Subject: [Bug 422536] Re: EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
I see the fix is released but update manager didn't find it. How to get
it?
In my case the problem occurred just after restart. When the gnome
loaded it said the little thing showing if I'm online, offline, letting
me restart, shutdown my gear, etc. couldn't run and asked if I want to
remove it from my panel.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a direct subscriber
of the bug.
Status in The Linux Kernel: Fix Released
Status in ?kerneloops? package in Ubuntu: Fix Released
Status in ?linux? package in Ubuntu: Fix Released
?
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
Architecture: amd64
USER PID ACCESS COMMAND
/dev/snd/controlC0: yoman82 3464 F.... pulseaudio
/dev/snd/pcmC0D0p: yoman82 3464 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card hw:0 'SB'/'HDA ATI SB at 0xf9ff0000 irq 16'
Mixer name : 'Realtek ALC888'
Components : 'HDA:10ec0888,18491e01,00100001'
Controls : 37
Simple ctrls : 21
Date: Tue Sep 1 07:48:00 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=69c64130-cc6f-4a5b-952b-3ba4c893ba48
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
NonfreeKernelModules: nvidia
Package: linux-image-2.6.31-8-generic 2.6.31-8.28
ProcCmdLine: root=UUID=19f3bdd6-1b33-48e0-8081-d00e178d9f7d ro splash vga=792
ProcVersionSignature: Ubuntu 2.6.31-8.28-generic
linux-backports-modules-2.6.31-8-generic N/A
linux-firmware 1.16
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: 6.073813] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Uname: Linux 2.6.31-8-generic x86_64
dmi.bios.date: 04/24/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P1.00
dmi.board.name: M3A780GXH/128M
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a direct subscriber
of the bug.
Status in The Linux Kernel: Fix Released
Status in ?kerneloops? package in Ubuntu: Fix Released
Status in ?linux? package in Ubuntu: Fix Released
?
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
Architecture: amd64
USER PID ACCESS COMMAND
/dev/snd/controlC0: yoman82 3464 F.... pulseaudio
/dev/snd/pcmC0D0p: yoman82 3464 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card hw:0 'SB'/'HDA ATI SB at 0xf9ff0000 irq 16'
Mixer name : 'Realtek ALC888'
Components : 'HDA:10ec0888,18491e01,00100001'
Controls : 37
Simple ctrls : 21
Date: Tue Sep 1 07:48:00 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=69c64130-cc6f-4a5b-952b-3ba4c893ba48
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
NonfreeKernelModules: nvidia
Package: linux-image-2.6.31-8-generic 2.6.31-8.28
ProcCmdLine: root=UUID=19f3bdd6-1b33-48e0-8081-d00e178d9f7d ro splash vga=792
ProcVersionSignature: Ubuntu 2.6.31-8.28-generic
linux-backports-modules-2.6.31-8-generic N/A
linux-firmware 1.16
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: 6.073813] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Uname: Linux 2.6.31-8-generic x86_64
dmi.bios.date: 04/24/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P1.00
dmi.board.name: M3A780GXH/128M
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
nidhogge
2009-11-01 13:56:15 UTC
Permalink
** Changed in: linux
Status: Fix Released => Fix Committed

** Changed in: linux
Status: Fix Committed => Fix Released
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
James Westby
2009-11-01 16:08:20 UTC
Permalink
** Changed in: kerneloops (Ubuntu)
Status: Fix Released => Triaged

** Changed in: linux
Status: Fix Released => New

** Changed in: linux (Ubuntu)
Status: Fix Released => Confirmed

** Changed in: linux (Ubuntu)
Assignee: magia154 (magia154-gmail) => Andy Whitcroft (apw)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
bwallum
2009-11-01 19:15:32 UTC
Permalink
When will the fix be available in the repos do you think? It occurs very
regularly and I can't find a consistent pattern. I've been trying to
get floppy drives working and the bug pops up all the time. I have
absolutely no idea if the two are linked, just putting the idea across
for determination.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
cyrulution
2009-11-01 20:33:46 UTC
Permalink
help!
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
cyrulution
2009-11-01 20:35:39 UTC
Permalink
count plus one
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
CupofDice
2009-11-01 23:30:09 UTC
Permalink
I have this same problem, on a AMD 64 with a Nvidia driver. Hoping for a
fix.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
RagTimE
2009-11-01 23:32:28 UTC
Permalink
hello still waiting for the fix please release it
i have installed some machines all "msi k9n v2 amd64 / ubuntu64" motherboards with this problem
i am on w7 at the moment ... i will use my ubuntu :)

regrets
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Guilden_NL - Joop deBruin
2009-11-02 02:49:58 UTC
Permalink
MSI K8n Neo4 motherboard. AMD 64, Nvidia Driver 185.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
stephan
2009-11-02 13:48:15 UTC
Permalink
On Mon, 02 Nov 2009 02:49:58 -0000
Post by Guilden_NL - Joop deBruin
MSI K8n Neo4 motherboard. AMD 64, Nvidia Driver 185.
What means all about?
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
A. Robert Johnson
2009-11-02 04:37:46 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Committed

** Changed in: linux (Ubuntu)
Status: Fix Committed => Confirmed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
traacer
2009-11-02 05:39:06 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Confirmed => Incomplete

** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
k c davis
2009-11-02 07:48:16 UTC
Permalink
Not sure why the error system on my PC connected to this bug thread, but
immediately on starting newly installed 9.10, on this Amd64 system with
Nvidia audio and video (using, I believe ATM, the open source drivers)
I'm getting persistent, essentially constant reports of "System
encountered a serious kernel problem ... May be unstable" ....

Seems(?) to run okay though, so far.

No ECC memory in this box, but as someone noted, the Phenom processor
might have the logic to support it.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Jan Obrátil
2009-11-02 07:55:47 UTC
Permalink
Hello, this is not a bug I think. I have the same "problem". My
motherboard can use both ECC and non-ECC RAMs. I use non-ECC ram and
motherboard reports, that it use non-ECC and it can use ECC RAM. Not
that it use ECC RAM as non-ECC RAM.

The bug should be corrected by lowering severity from warning to nocice
or something like that in that case.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Ian Sinclair
2009-11-02 15:31:06 UTC
Permalink
I could put up with the error messages if I had a useable machine, but I
have found that I cannot use my accounts program (Grisbi) because of a
segmentation fault when trying to save after a reconciliation. Add to
thie being unable to print photos from F-spot or photoprint, and I
wonder what to do now. Should I wait in the hope that it will all be
sorted out (classed as "medium2, but not medium for me) or re-install
9.04 (which was stable and not significantly different otherwise in
terms of useability).
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Electric Bill
2009-11-02 17:11:19 UTC
Permalink
Biostar TF720 A2+ motherboard, AMD 8750 Phenom? X3,M Station HT-1100
HTPC Media Center case, Antec 480 NeoPower power supply, 2GB Patriot
PSD22G800KH RAM, Gigabyte GV-R467ZL 4670 1GB video card w/ATI/AMD
proprietary FGLRX driver using Samsung LNS3251D HDTV as monitor.

Issues:
When booting into Karmic, using HDMI cable between GFX card and TV, I have to shut off the TV momentarily for the boot to continue - it stalls right after the Ubuntu boot selection page.
If I use a VGA cable it boots normally and I don't see theselection page.
Also having issues with wireless Mouse/keyboards dropping out soon after Ubuntu starts.

This computer had no issues with Jaunty or with Win 7 on another hard
drive.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Peter Struhar
2009-11-02 19:02:06 UTC
Permalink
got this bug after karmic update, but i cant adjust anything mem related
in bios to turn off/override ECC settings as suggsted but he bug output

my part of dmesg with appearance of the issue :
[ 11.313784] [fglrx] Maximum main memory to use for locked dma buffers: 3550 MBytes.
[ 11.313823] [fglrx] vendor: 1002 device: 9612 count: 1
[ 11.314167] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[ 11.314175] pci 0000:01:05.0: setting latency timer to 64
[ 11.314523] [fglrx] Kernel PAT support is enabled
[ 11.314561] [fglrx] module loaded - fglrx 8.66.2 [Sep 23 2009] with 1 minors
[ 11.320919] EDAC amd64_edac: Ver: 3.2.0 Oct 16 2009
[ 11.320998] EDAC amd64: This node reports that Memory ECC is currently disabled.
[ 11.321002] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
[ 11.321005] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
[ 11.321006] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
[ 11.321008] Might be a BIOS bug, if BIOS says ECC is enabled
[ 11.321009] Use of the override can cause unknown side effects.
[ 11.321020] amd64_edac: probe of 0000:00:18.2 failed with error -22


looks like there might be something with the module amd64_edac_mod :
user at ntb:~$ lsmod | grep -i edac
amd64_edac_mod 26688 0
edac_core 48876 1 amd64_edac_mod

which contains the suggested ecc_enable_override:
user at ntb:~$ modinfo amd64_edac_mod
filename: /lib/modules/2.6.31-14-generic/kernel/drivers/edac/amd64_edac_mod.ko
description: MC support for AMD64 memory controllers - Ver: 3.2.0 Oct 16 2009
author: SoftwareBitMaker: Doug Thompson, Dave Peterson, Thayne Harbaugh
license: GPL
srcversion: A01E9E7B99D4A25C946BF10
alias: pci:v00001022d00001302sv*sd*bc*sc*i*
alias: pci:v00001022d00001202sv*sd*bc*sc*i*
alias: pci:v00001022d00001102sv*sd*bc*sc*i*
depends: edac_core
vermagic: 2.6.31-14-generic SMP mod_unload modversions
parm: report_gart_errors:int
parm: ecc_enable_override:int
parm: edac_op_state:EDAC Error Reporting state: 0=Poll,1=NMI (int)

looks like all the amd64 processor family users in above posts have same
related issue, maybe with shared mem video cards cause this. Mine is ATI
HD RADEON 3200, 256MB shared.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Peter Struhar
2009-11-02 19:01:38 UTC
Permalink
got this bug after karmic update, but i cant adjust anything mem related
in bios to turn off/override ECC settings as suggsted but he bug output

my part of dmesg with appearance of the issue :
[ 11.313784] [fglrx] Maximum main memory to use for locked dma buffers: 3550 MBytes.
[ 11.313823] [fglrx] vendor: 1002 device: 9612 count: 1
[ 11.314167] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[ 11.314175] pci 0000:01:05.0: setting latency timer to 64
[ 11.314523] [fglrx] Kernel PAT support is enabled
[ 11.314561] [fglrx] module loaded - fglrx 8.66.2 [Sep 23 2009] with 1 minors
[ 11.320919] EDAC amd64_edac: Ver: 3.2.0 Oct 16 2009
[ 11.320998] EDAC amd64: This node reports that Memory ECC is currently disabled.
[ 11.321002] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
[ 11.321005] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
[ 11.321006] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
[ 11.321008] Might be a BIOS bug, if BIOS says ECC is enabled
[ 11.321009] Use of the override can cause unknown side effects.
[ 11.321020] amd64_edac: probe of 0000:00:18.2 failed with error -22


looks like there might be something with the module amd64_edac_mod :
user at ntb:~$ lsmod | grep -i edac
amd64_edac_mod 26688 0
edac_core 48876 1 amd64_edac_mod

which contains the suggested ecc_enable_override:
user at ntb:~$ modinfo amd64_edac_mod
filename: /lib/modules/2.6.31-14-generic/kernel/drivers/edac/amd64_edac_mod.ko
description: MC support for AMD64 memory controllers - Ver: 3.2.0 Oct 16 2009
author: SoftwareBitMaker: Doug Thompson, Dave Peterson, Thayne Harbaugh
license: GPL
srcversion: A01E9E7B99D4A25C946BF10
alias: pci:v00001022d00001302sv*sd*bc*sc*i*
alias: pci:v00001022d00001202sv*sd*bc*sc*i*
alias: pci:v00001022d00001102sv*sd*bc*sc*i*
depends: edac_core
vermagic: 2.6.31-14-generic SMP mod_unload modversions
parm: report_gart_errors:int
parm: ecc_enable_override:int
parm: edac_op_state:EDAC Error Reporting state: 0=Poll,1=NMI (int)

looks like all the amd64 processor family users in above posts have same
related issue, maybe with shared mem video cards cause this. Mine is ATI
HD RADEON 3200, 256MB shared.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
jomafras
2009-11-02 19:12:01 UTC
Permalink
** Changed in: kerneloops (Ubuntu)
Status: Triaged => Fix Released
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
sam601
2009-11-02 20:13:34 UTC
Permalink
** Changed in: kerneloops (Ubuntu)
Status: Fix Released => Fix Committed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
James Westby
2009-11-02 20:21:38 UTC
Permalink
** Changed in: kerneloops (Ubuntu)
Status: Fix Committed => Triaged
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
James Westby
2009-11-02 20:31:23 UTC
Permalink
Please refrain from changing the status of this bug report without giving
a rationale.

This bug is not yet fixed, but I just uploaded a change that will mean you
stop getting pestered about it. That change should hit your machines in
about a week after it has gone through testing.

I am well aware that this problem will go away, so reports that it is "fixed"
at that time will be useless. The problem will not be fixed, we will have just
stopped the nagging.

Thanks,

James


** Description changed:

- ?
+ The edac_amd64 module attempts to load on many systems. If the system doesn't have ECC
+ memory, or it is disabled in the BIOS, then the module prints
+
+ EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
+ Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
+ Might be a BIOS bug, if BIOS says ECC is enabled
+ Use of the override can cause unknown side effects.
+
+ before failing to load. This won't cause issues for most people that see
+ the message.
+
+ kerneloops picks this up as kernel problem as the "WARNING:" looks a lot like what
+ you get when using WARN().
+
+ There are several aspects to this issue:
+
+ * linux
+ - something attempts to load the module when perhaps it doesn't need to (unclear at this point)
+ - the module looks like it is using WARN() when it isn't, and is arguably more SHOUTY than
+ it needs to be.
+ * kerneloops
+ - picks up this as WARN() when it isn't.
+ - Was accidentally left enabled for the stable release, people shouldn't be getting asked to report
+ this at this point.
+ - Isn't very good at dealing with repeat issues, causing more reports to be sent than are needed.
+
+ and possibly others as well.

ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
Architecture: amd64
AudioDevicesInUse:
- USER PID ACCESS COMMAND
- /dev/snd/controlC0: yoman82 3464 F.... pulseaudio
- /dev/snd/pcmC0D0p: yoman82 3464 F...m pulseaudio
+ ?USER PID ACCESS COMMAND
+ ?/dev/snd/controlC0: yoman82 3464 F.... pulseaudio
+ ?/dev/snd/pcmC0D0p: yoman82 3464 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
- Card hw:0 'SB'/'HDA ATI SB at 0xf9ff0000 irq 16'
- Mixer name : 'Realtek ALC888'
- Components : 'HDA:10ec0888,18491e01,00100001'
- Controls : 37
- Simple ctrls : 21
+ ?Card hw:0 'SB'/'HDA ATI SB at 0xf9ff0000 irq 16'
+ ???Mixer name : 'Realtek ALC888'
+ ???Components : 'HDA:10ec0888,18491e01,00100001'
+ ???Controls : 37
+ ???Simple ctrls : 21
Date: Tue Sep 1 07:48:00 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=69c64130-cc6f-4a5b-952b-3ba4c893ba48
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
NonfreeKernelModules: nvidia
Package: linux-image-2.6.31-8-generic 2.6.31-8.28
PccardctlIdent:
-
+
PccardctlStatus:
-
+
ProcCmdLine: root=UUID=19f3bdd6-1b33-48e0-8081-d00e178d9f7d ro splash vga=792
ProcVersionSignature: Ubuntu 2.6.31-8.28-generic
RelatedPackageVersions:
- linux-backports-modules-2.6.31-8-generic N/A
- linux-firmware 1.16
+ ?linux-backports-modules-2.6.31-8-generic N/A
+ ?linux-firmware 1.16
RfKill:
- 0: phy0: Wireless LAN
- Soft blocked: no
- Hard blocked: no
+ ?0: phy0: Wireless LAN
+ ??Soft blocked: no
+ ??Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: 6.073813] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Uname: Linux 2.6.31-8-generic x86_64
WifiSyslog:
-
+
WpaSupplicantLog:
-
+
dmi.bios.date: 04/24/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P1.00
dmi.board.name: M3A780GXH/128M
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.00:bd04/24/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnM3A780GXH/128M:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Niesje86
2009-11-02 22:37:15 UTC
Permalink
** Changed in: kerneloops (Ubuntu)
Assignee: James Westby (james-w) => Niesje86 (vanleijen-mgj)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Niesje86
2009-11-02 22:59:03 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Committed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Harry
2009-11-03 06:54:01 UTC
Permalink
James, is this the workaround you wrote?
"We disable apport on stable releases, but currently kerneloops still runs, which
causes apport to pop up with reports of kernel issues. We should therefore prevent
kerneloops from running as well."
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
James Westby
2009-11-03 10:52:55 UTC
Permalink
Harry, that is correct.

Thanks,

James


** Changed in: linux (Ubuntu)
Status: Fix Committed => Confirmed

** Changed in: kerneloops (Ubuntu)
Assignee: Niesje86 (vanleijen-mgj) => James Westby (james-w)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Ian Sinclair
2009-11-03 14:30:14 UTC
Permalink
Update today (Nov. 3) has no effect. Error message is still present, and
applications are affected (Grisbi cannot save file, segmentation error;
F-spot printouts area grey pattern, not of selected pix)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Marco Massenzio
2009-11-03 20:08:16 UTC
Permalink
Is anyone doing anything about this?
Hugely annoying, especially as it seems to be a bit of a red herring - system works fine and no adverse effect.

I'd be happy to know if that noisy crash detection nuisance can at least
be disabled - it's lame, guys.... makes me feel like I'm using WIndows
again: in terms of usefulness it's on a par with Office paperclip....
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Andy Whitcroft
2009-11-03 21:37:07 UTC
Permalink
To reiterate there are two components to this issue:

1) the kernel is now producing this new WARNING: message related to
chipset support for EEC where it is not enabled in the BIOS. For
machines which do not have EEC at all there may not even be a BIOS
option to enable it. The message itself mearly indicates that the
feature is present in the chipset but not enabled; a normal situation.

2) kerneloops is falsly reporting this WARNING: message as if it was a
WARN_ON; which it is not. Kerneloops needs to be fixed to more
accuratly detect the correct WARN_ON output.

As is normal after release kerneloops itself is now disabled so although
it might falsely trigger it will no longer trigger these errors.
Kerneloops itself still needs to be fixed and as such that task remains
open. The kernel is working as designed and therefore I will close it
off Invalid as there is no kernel fault.

** Changed in: linux (Ubuntu)
Status: Confirmed => Invalid
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
speleovar
2009-11-03 23:23:49 UTC
Permalink
i've just updated then upgraded kerneloops-daemon - and i've reboot too
: it's same than before : same warning for this same bug.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Electric Bill
2009-11-04 03:07:43 UTC
Permalink
I also previously reported this bug with my Biostar rig (post 179).

Today I installed Karmic on a Foxconn A7DA-S motherboard with an AMD 940 Phenom II, Corsair CMPSU-650TX power supply, 4GB (2x1GB) G.Skill F2-8500CL5D RAM, Asus EAH 3870 512MB video card using HDMI to a Samsung LNS3251D HDTV.
Same issue and bug report.
When booting I get as far as the Grub selection screen and then I have to unplug the HDMI cable for the boot to continue.
The cable disconnect only has to last a few seconds for the boot to continue.
With the Biostar I can quickly shut the TV on and off but the Foxconn has to be momentarily disconnected.

The Bioster TF720 A2+ uses an NVIDIA nForce 720a chipset and has integrated Geforce 8100 based graphics although I'm using a Radeon 4670 discrete video card.
The Foxconn A7DA-S uses AMD? 790GX + SB750 chipsets and has integrated AMD HD3300 based graphics although I'm using a Radeon 3870 discrete video card.

Both computers will boot normally with my Samsung T220HD monitor/LCD TV using HDMI interface.
Both rigs use DDR2 SDRAM non ECC.
Both have multiple operating systems on separate hard drives.
Win 7, XP and Ubuntu Jaunty but the problems only happen with Karmic.

Hope this information helps.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
tjw
2009-11-04 05:36:50 UTC
Permalink
I have a AsRock K10N78 motherboard. Everything worked fine until I
installed the qemu-kvm package then I started getting this error. To
troubleshoot, I loaded the Failsafe Defaults in by BIOS and this error
was gone. I went back into BIOS and re-enabled everything that I had
changed previously and it turned out to be a feature called "CPU Quiet
Fan" that caused the trouble. I can reproduce the error be toggling
this feature on.

I don't know if this will help in diagnosing this bug, but I suggest
resetting your BIOS to defaults to see if it works for you too.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Frank Groeneveld
2009-11-04 07:25:14 UTC
Permalink
Why is it invalid? It's happening for a lot of people and it's quite
annoying...

** Changed in: linux (Ubuntu)
Status: Invalid => New
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
storsanden
2009-11-04 09:48:26 UTC
Permalink
** Also affects: kdesudo
Importance: Undecided
Status: New
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Giorgos67
2009-11-04 10:14:22 UTC
Permalink
My own BIOS, doesn't even have an ECC entry.
(I suspecting, that I don't even have such type of memory).

Greets!!! :-)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Martin Pitt
2009-11-04 10:15:37 UTC
Permalink
** Changed in: kdesudo
Status: New => Invalid
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Andy Whitcroft
2009-11-04 13:56:31 UTC
Permalink
@Frank Groeneveld -- this bug is Invalid for the linux package, as there
is no bug in the kernel. The bug is in the kerneloops package which is
_incorrectly_ reporting this mild warning from the kernel as a crash;
which it is not. The kernel is not to blame, the kernel task therefore
should be Invalid. The kerneloops task is still open as the bug is not
yet fixed in kerneloops. However, you should no longer be recieving
popups for this error if you have installed the latest updates as
kerneloops should now be disabled.

** Changed in: linux (Ubuntu)
Status: New => Invalid
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Harry
2009-11-04 15:28:34 UTC
Permalink
I confirm I no longer get kerneloops popups, which report a crash and a serious kernel issue.
So now the kerneloops issue is hidden.
I have the latest kerneloops installed: kerneloops-daemon_0.12+git20090217-1ubuntu4.1
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
RickardJ
2009-11-04 17:00:20 UTC
Permalink
I STILL get this error, and my system is up to date.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
pablomme
2009-11-04 17:21:53 UTC
Permalink
Is the kerneloops fix in the regular karmic-updates repository, or does
one have to enable karmic-proposed?
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Harry
2009-11-05 06:17:59 UTC
Permalink
pablomme,

The kerneloops-daemon has been moved from Karmic-proposed to Karmic-
updates on 3rd November.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Andreas Noteng
2009-11-06 17:46:01 UTC
Permalink
This error appeared for the first time today, it also seems to slow down the system, or at least network speed. Also getting the following new errors in dmesg:
[10678.935979] ACPI: BIOS _OSI(Linux) query ignored
[10806.726460] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x00000020
[11676.858774] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x00000020

No updates installed today. I'll try to reboot and check if the message
reappears.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
eunix
2009-11-06 20:40:30 UTC
Permalink
The system which generated this error warning was a Gigabyte motherboard + AMD Socket AM2 M61P-S3. The loaded Award BIOS does NOT have an enable/disable ECC function.
eunix
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
mad
2009-11-08 20:24:36 UTC
Permalink
after updating new kernel generic: img-2.6.31-15-generic
today, error warning is gone away
matze
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Martin Pitt
2009-11-09 07:06:46 UTC
Permalink
Oh, it was included in the current SRU? The changelog of linux does not
seem to mention this. All the better, though.

** Also affects: kerneloops (Ubuntu Karmic)
Importance: Undecided
Status: New

** Also affects: linux (Ubuntu Karmic)
Importance: Undecided
Status: New

** Changed in: linux (Ubuntu Karmic)
Status: New => Fix Committed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
bwallum
2009-11-10 13:37:47 UTC
Permalink
Fresh AMD64 Karmic install, non ECC for DDR 400 memory. Latest updates 13:35 GMT Tuesday 10th November.
Five instances of bug upon restart once all updates installed.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
fyo
2009-11-13 00:07:41 UTC
Permalink
Fresh AMD64 Karmic install, all updates, non-ECC DDR400 memory.

Bug STILL occurs.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Jeff
2009-11-13 00:36:02 UTC
Permalink
Seems to be fixed for me. I've been updating regularly. Noticed the
problem stopped occurring a day or two ago.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
$lunacy
2009-11-24 06:50:11 UTC
Permalink
Bug apparently fixed for me, too.

I was away from this computer for a while, and applied a whole pile of
updates in a row, so I'm not sure which one did it, but the problem doesn't
seem to be occurring anymore.
Post by Jeff
Seems to be fixed for me. I've been updating regularly. Noticed the
problem stopped occurring a day or two ago.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a direct subscriber
of a duplicate bug.
Status in KDE frontend for sudo: Invalid
Status in The Linux Kernel: New
Status in ?kerneloops? package in Ubuntu: Triaged
Status in ?linux? package in Ubuntu: Invalid
Status in ?kerneloops? source package in Karmic: New
Status in ?linux? source package in Karmic: Fix Committed
The edac_amd64 module attempts to load on many systems. If the system
doesn't have ECC
memory, or it is disabled in the BIOS, then the module prints
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or use the 'ecc_enable_override'
parameter.
Might be a BIOS bug, if BIOS says ECC is enabled
Use of the override can cause unknown side effects.
before failing to load. This won't cause issues for most people that see
the message.
kerneloops picks this up as kernel problem as the "WARNING:" looks a lot
like what
you get when using WARN().
* linux
- something attempts to load the module when perhaps it doesn't need to
(unclear at this point)
- the module looks like it is using WARN() when it isn't, and is
arguably more SHOUTY than
it needs to be.
* kerneloops
- picks up this as WARN() when it isn't.
- Was accidentally left enabled for the stable release, people
shouldn't be getting asked to report
this at this point.
- Isn't very good at dealing with repeat issues, causing more reports
to be sent than are needed.
and possibly others as well.
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be
restarted.
Architecture: amd64
USER PID ACCESS COMMAND
/dev/snd/controlC0: yoman82 3464 F.... pulseaudio
/dev/snd/pcmC0D0p: yoman82 3464 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card hw:0 'SB'/'HDA ATI SB at 0xf9ff0000 irq 16'
Mixer name : 'Realtek ALC888'
Components : 'HDA:10ec0888,18491e01,00100001'
Controls : 37
Simple ctrls : 21
Date: Tue Sep 1 07:48:00 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=69c64130-cc6f-4a5b-952b-3ba4c893ba48
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
NonfreeKernelModules: nvidia
Package: linux-image-2.6.31-8-generic 2.6.31-8.28
ProcCmdLine: root=UUID=19f3bdd6-1b33-48e0-8081-d00e178d9f7d ro splash
vga=792
ProcVersionSignature: Ubuntu 2.6.31-8.28-generic
linux-backports-modules-2.6.31-8-generic N/A
linux-firmware 1.16
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: 6.073813] EDAC amd64: WARNING: ECC is NOT currently enabled by
the BIOS. Module will NOT be loaded.
Uname: Linux 2.6.31-8-generic x86_64
dmi.bios.date: 04/24/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P1.00
dmi.board.name: M3A780GXH/128M
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Shaved Wookie
2009-11-13 01:45:18 UTC
Permalink
Problem seems to have disappeared for me, but then I also changed the
ECC settings in my BIOS.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
dirk
2009-11-13 05:24:59 UTC
Permalink
Yes, after the update the warning is gone.
--
oscar <dirkmeissner72 at aol.com>
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
bwallum
2009-11-13 09:33:06 UTC
Permalink
2.6.31-15 kernel appears to fix the issue but I understand this just
mutes reporting in the top (default) panel. Is this still the case?
Where can I check to see if any log files have picked up the problem (if
it is just muted)?
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
bwallum
2009-11-13 09:38:57 UTC
Permalink
Found it in System>Administration>Log File Viewer:messages

Nov 13 08:48:50 ubuntu-bob kernel: [ 13.953926] EDAC MC: Ver: 2.1.0 Nov 10 2009
Nov 13 08:48:50 ubuntu-bob kernel: [ 13.983049] EDAC amd64_edac: Ver: 3.2.0 Nov 10 2009
Nov 13 08:48:50 ubuntu-bob kernel: [ 14.001782] EDAC amd64: This node reports that Memory ECC is currently disabled.
Nov 13 08:48:50 ubuntu-bob kernel: [ 14.001789] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
Nov 13 08:48:50 ubuntu-bob kernel: [ 14.001792] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Nov 13 08:48:50 ubuntu-bob kernel: [ 14.001794] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
Nov 13 08:48:50 ubuntu-bob kernel: [ 14.001795] Might be a BIOS bug, if BIOS says ECC is enabled
Nov 13 08:48:50 ubuntu-bob kernel: [ 14.001796] Use of the override can cause unknown side effects.
Nov 13 08:48:50 ubuntu-bob kernel: [ 14.001824] amd64_edac: probe of 0000:00:18.2 failed with error -22
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
AndyP
2009-11-19 14:04:18 UTC
Permalink
a) I will now go into my bios and check that ECC is enabled.
Perhaps the restricted dialogue box could request this before installing the driver that should not function.
b)if Unbunto would list the recommended Nvidia driver first on the list of resticted drivers, the install would be easier for the user
Why are many software developers unable to perform pre-release usability testing? We need to be more sensiitive to the average user difficulty reading error messages!
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
AndyP
2009-11-19 14:04:32 UTC
Permalink
a) I will now go into my bios and check that ECC is enabled.
Perhaps the restricted dialogue box could request this before installing the driver that should not function.
b)if Unbunto would list the recommended Nvidia driver first on the list of resticted drivers, the install would be easier for the user
Why are many software developers unable to perform pre-release usability testing? We need to be more sensiitive to the average user difficulty reading error messages!
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Flywaver
2009-11-21 17:31:26 UTC
Permalink
I can confirm that the issue is gone and there is no error message in
the log viewer! :D
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
rajesh
2009-11-22 06:45:43 UTC
Permalink
thanks to all the issue is gone.
Post by Flywaver
I can confirm that the issue is gone and there is no error message in
the log viewer! :D
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a direct subscriber
of the bug.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Jarl
2009-11-24 09:49:47 UTC
Permalink
I still have this warning (I ran apt-get upgrade 2009-11-23) on my Asus
M3N-HD HDMI motherboard. I see that my BIOS version is 1502 (far from
the latest), could the warnings have anything to do with that?

Jarl
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Robb Munson
2009-11-24 10:05:12 UTC
Permalink
please quit putting me as a subscriber, I do not have issues with any said
bugs that I am ever subscribed to by others. thank you.
Post by Jarl
I still have this warning (I ran apt-get upgrade 2009-11-23) on my Asus
M3N-HD HDMI motherboard. I see that my BIOS version is 1502 (far from
the latest), could the warnings have anything to do with that?
Jarl
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a direct subscriber
of the bug.
Status in KDE frontend for sudo: Invalid
Status in The Linux Kernel: New
Status in ?kerneloops? package in Ubuntu: Triaged
Status in ?linux? package in Ubuntu: Invalid
Status in ?kerneloops? source package in Karmic: New
Status in ?linux? source package in Karmic: Fix Committed
The edac_amd64 module attempts to load on many systems. If the system
doesn't have ECC
memory, or it is disabled in the BIOS, then the module prints
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or use the 'ecc_enable_override'
parameter.
Might be a BIOS bug, if BIOS says ECC is enabled
Use of the override can cause unknown side effects.
before failing to load. This won't cause issues for most people that see
the message.
kerneloops picks this up as kernel problem as the "WARNING:" looks a lot
like what
you get when using WARN().
* linux
- something attempts to load the module when perhaps it doesn't need to
(unclear at this point)
- the module looks like it is using WARN() when it isn't, and is
arguably more SHOUTY than
it needs to be.
* kerneloops
- picks up this as WARN() when it isn't.
- Was accidentally left enabled for the stable release, people
shouldn't be getting asked to report
this at this point.
- Isn't very good at dealing with repeat issues, causing more reports
to be sent than are needed.
and possibly others as well.
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be
restarted.
Architecture: amd64
USER PID ACCESS COMMAND
/dev/snd/controlC0: yoman82 3464 F.... pulseaudio
/dev/snd/pcmC0D0p: yoman82 3464 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card hw:0 'SB'/'HDA ATI SB at 0xf9ff0000 irq 16'
Mixer name : 'Realtek ALC888'
Components : 'HDA:10ec0888,18491e01,00100001'
Controls : 37
Simple ctrls : 21
Date: Tue Sep 1 07:48:00 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=69c64130-cc6f-4a5b-952b-3ba4c893ba48
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
NonfreeKernelModules: nvidia
Package: linux-image-2.6.31-8-generic 2.6.31-8.28
ProcCmdLine: root=UUID=19f3bdd6-1b33-48e0-8081-d00e178d9f7d ro splash
vga=792
ProcVersionSignature: Ubuntu 2.6.31-8.28-generic
linux-backports-modules-2.6.31-8-generic N/A
linux-firmware 1.16
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: 6.073813] EDAC amd64: WARNING: ECC is NOT currently enabled by
the BIOS. Module will NOT be loaded.
Uname: Linux 2.6.31-8-generic x86_64
dmi.bios.date: 04/24/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P1.00
dmi.board.name: M3A780GXH/128M
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Robb Munson
2009-11-24 10:08:26 UTC
Permalink
I keep getting subscribed to bugs such as this, can someone please tell
me how to stop this? thanks (I do not have any related bugs that I
personally sent in, but I keep getting subscribed to duplicates...and
the duplicates lead to these bugs...which lead to others, turns into a
massive chain reaction that bombards my inbox and really infuriates me.)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Jerome R
2009-11-24 17:46:24 UTC
Permalink
Bug apparently fixed for me, too.

i enabled update manager from startup.. And no problem !

->2.6.31-15 kernel appears to fix the issue.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
INFOMDQ
2009-11-24 21:30:10 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Invalid => In Progress

** Changed in: linux (Ubuntu)
Status: In Progress => New
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
shane fagan
2009-11-24 23:08:39 UTC
Permalink
** Changed in: linux
Status: New => Invalid

** Changed in: linux (Ubuntu)
Status: New => Invalid
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Sunil Kashyap
2009-11-27 04:04:20 UTC
Permalink
** Changed in: kerneloops (Ubuntu)
Status: Triaged => Fix Released

** Changed in: kerneloops (Ubuntu)
Status: Fix Released => New
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Martin Pitt
2009-11-27 08:07:24 UTC
Permalink
** Changed in: kerneloops (Ubuntu)
Status: New => Triaged
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Jarl
2009-11-27 14:54:17 UTC
Permalink
As follow up on comment 214, I just upgraded to the latest stable bios
(ver 2102), and it didn't change anything regarding this bug. I still
see this in my log.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Jarl
2009-11-27 19:32:56 UTC
Permalink
I am sorry, it seems like my comments are a bit out-of-place for this
bug. To be honest I see these warnings in my /var/log/messages, but
there is no kerneloops/kernel panic. So basically my system is running
fine, I just kgot these misleading warnings in /var/log/messages. Tell
me if this bug is concerning the more serious situation where the system
is not able to boot, in which case I will mark the bug "not affecting
me". I am sorry if my comments have been misleading...
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
ethernet
2009-11-29 05:19:42 UTC
Permalink
this problem was not there until i downloaded firestarter. system had
no errors. i had a problem with my ethernet card it need to be reset
after i uninstalled firestarter . i had not downloaded any upgrades at
all. to fix the ethernet problem i uninstalled the card and rebooted. i
enable it and rebooted everything works. if i boot without the ethernet
plugged in the warning comes back with ethernet no warning. i ran a dio
on memory and hardware everything is great.

ubuntu 9.10 rocks (outstanding product) (its years advanced to the
micro shiiiiiisnt that they sell and control.) excuse the word i thought
about changing it for a split second but whats true is true.

hope this helps

thank you ubuntu,
ethernet
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Carlos Andres Avila Gutierrez
2009-12-02 13:33:43 UTC
Permalink
My computer hardware configuration
-->AMD Atlon X2 5200
-->Board MSI K9N6GM
-->2GB RAM
-->Hard Disk 500GB Hitachi SATA and other 320GB Hitachi SATA

I install Ubuntu 9.10.
When I put hibernation mode, then I try to startup my pc and one error message appears.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
imre85
2009-12-06 14:06:09 UTC
Permalink
** Changed in: linux (Ubuntu Karmic)
Assignee: (unassigned) => imre85 (imre-guaglianone)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Minux
2009-12-28 17:56:14 UTC
Permalink
1- Message en Anglais que je ne comprend pas...
2-Grub ne me donne plus le choix de d?marrage des autres OS install?s sur mon ordinateur et est tr?s long.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Minux
2009-12-28 17:56:36 UTC
Permalink
1- Message en Anglais que je ne comprend pas...
2-Grub ne me donne plus le choix de d?marrage des autres OS install?s sur mon ordinateur et est tr?s long.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
belzaroth
2010-01-03 01:37:25 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Invalid => Confirmed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Minux
2010-01-03 09:58:29 UTC
Permalink
Post by doucetan
** Changed in: linux (Ubuntu)
Status: Invalid => Confirmed
Merci pour votre r?ponse, malheureusement je ne parle ni ne lis
l'Englais suffisement bien pour saisir pleinement le sense de votre
m?ssage.
Je vais poster celle-ci sur un forum fran?ais afin d'obtenir une
solution.

Amicalement;

Bruno S?radzski.


** Attachment added: "BogueAMD64_Eng.png"
Loading Image...
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Martin Pitt
2010-01-03 09:06:05 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Released
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Minux
2010-01-03 09:53:32 UTC
Permalink
Post by doucetan
** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Released
Merci, mais je ne comprend rien ? l'Englais...
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
pablomme
2010-01-03 10:21:38 UTC
Permalink
@Minux: http://translate.google.com
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Marc López Roca
2010-01-04 15:45:49 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Fix Released => Fix Committed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Martin Pitt
2010-01-04 16:18:27 UTC
Permalink
Don't change bug states without further explanation.

** Changed in: linux (Ubuntu)
Status: Fix Committed => Fix Released
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Frdbrkl
2010-01-05 21:08:47 UTC
Permalink
Anecdotally speaking, I never experienced the bug until I booted my
machine with the External Lacie Firewire Hard Drive plugged into the
machine but "switched off" at the hard drive itself (powered down by
switch in the external enclosure).

I'm not a programmer, but thought this may provide a clue (it explains
the 1394 failure comments on the boot screen though).
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Minux
2010-01-07 18:10:40 UTC
Permalink
Post by Frdbrkl
Anecdotally speaking, I never experienced the bug until I booted my
machine with the External Lacie Firewire Hard Drive plugged into the
machine but "switched off" at the hard drive itself (powered down by
switch in the external enclosure).
I'm not a programmer, but thought this may provide a clue (it explains
the 1394 failure comments on the boot screen though).
Merci pour cette r?ponse.
Effectivement j'ai un Disque Dur Externe branch? ? mon PC via une prise USB,
et celui-ci ?tait branch? au PC ( ?teint) lorsque j'ai proc?d? ? l'installation.
Je vais proc?d? ? des testes sans ce DD externe.
Cordialement;
Bruno S?radzski.
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Takenzo
2010-01-09 22:22:40 UTC
Permalink
** Changed in: kerneloops (Ubuntu)
Status: Triaged => Fix Released

** Changed in: linux (Ubuntu)
Status: Fix Released => Confirmed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Shane Fagan
2010-01-09 22:49:40 UTC
Permalink
Please dont change the status of bugs without saying why. Please read
the comments they explain its not an issue its just apport picking up on
a kernel warning.

** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Released
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
AndreyI
2010-01-13 07:06:53 UTC
Permalink
** Changed in: linux (Ubuntu)
Assignee: Andy Whitcroft (apw) => AndreyI (asr)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Tolea
2010-01-16 10:20:50 UTC
Permalink
i didn't felt problems with this bug.. and maibe i wownt... (after readiong the info below)
but in anny case ... it's not a normal reaction off the system...

P.S. thanks for your work in the opensource projects :)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Minux
2010-01-17 10:05:40 UTC
Permalink
Post by Tolea
i didn't felt problems with this bug.. and maibe i wownt... (after readiong the info below)
but in anny case ... it's not a normal reaction off the system...
P.S. thanks for your work in the opensource projects :)
I'have install 9.04 64 bit, it's ok and update to 9.10 it's ok no problems.
Sorry for my English;
Bruno S?radzski.
Post by Tolea
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a direct subscriber
of the bug.
Status in KDE frontend for sudo: Invalid
Status in The Linux Kernel: Invalid
Status in ???kerneloops??? package in Ubuntu: Fix Released
Status in ???linux??? package in Ubuntu: Fix Released
Status in ???kerneloops??? source package in Karmic: New
Status in ???linux??? source package in Karmic: Fix Committed
The edac_amd64 module attempts to load on many systems. If the system doesn't
have ECC
memory, or it is disabled in the BIOS, then the module prints
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or use the 'ecc_enable_override'
parameter.
Might be a BIOS bug, if BIOS says ECC is enabled
Use of the override can cause unknown side effects.
before failing to load. This won't cause issues for most people that see the
message.
kerneloops picks this up as kernel problem as the "WARNING:" looks a lot
like what
you get when using WARN().
* linux
- something attempts to load the module when perhaps it doesn't need to
(unclear at this point)
- the module looks like it is using WARN() when it isn't, and is
arguably more SHOUTY than
it needs to be.
* kerneloops
- picks up this as WARN() when it isn't.
- Was accidentally left enabled for the stable release, people shouldn't
be getting asked to report
this at this point.
- Isn't very good at dealing with repeat issues, causing more reports to
be sent than are needed.
and possibly others as well.
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be
restarted.
Architecture: amd64
??USER PID ACCESS COMMAND
??/dev/snd/controlC0: yoman82 3464 F.... pulseaudio
??/dev/snd/pcmC0D0p: yoman82 3464 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
??Card hw:0 'SB'/'HDA ATI SB at 0xf9ff0000 irq 16'
??????Mixer name : 'Realtek ALC888'
??????Components : 'HDA:10ec0888,18491e01,00100001'
??????Controls : 37
??????Simple ctrls : 21
Date: Tue Sep 1 07:48:00 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=69c64130-cc6f-4a5b-952b-3ba4c893ba48
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
NonfreeKernelModules: nvidia
Package: linux-image-2.6.31-8-generic 2.6.31-8.28
ProcCmdLine: root=UUID=19f3bdd6-1b33-48e0-8081-d00e178d9f7d ro splash vga=792
ProcVersionSignature: Ubuntu 2.6.31-8.28-generic
??linux-backports-modules-2.6.31-8-generic N/A
??linux-firmware 1.16
??0: phy0: Wireless LAN
????Soft blocked: no
????Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: 6.073813] EDAC amd64: WARNING: ECC is NOT currently enabled by the
BIOS. Module will NOT be loaded.
Uname: Linux 2.6.31-8-generic x86_64
dmi.bios.date: 04/24/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P1.00
dmi.board.name: M3A780GXH/128M
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
https://bugs.launchpad.net/kdesudo/+bug/422536/+subscribe
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Sophenus
2010-01-19 16:24:01 UTC
Permalink
** Changed in: linux (Ubuntu)
Assignee: AndreyI (asr) => Sophenus (sophenus)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
tarun1577
2010-01-20 06:42:43 UTC
Permalink
** Changed in: linux (Ubuntu)
Assignee: Sophenus (sophenus) => tarun1577 at yahoo.co.in (tarun1577)

** Changed in: linux (Ubuntu)
Status: Fix Released => Confirmed

** Changed in: kerneloops (Ubuntu)
Status: Fix Released => Confirmed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Sense Hofstede
2010-01-20 14:23:24 UTC
Permalink
Please don't assign yourself to a bug if you're not going to work on it
and please don't change the status without an explanation of why you're
reopening the bug.

** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Released

** Changed in: linux (Ubuntu)
Assignee: tarun1577 at yahoo.co.in (tarun1577) => (unassigned)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
spectrum4v12
2010-01-21 00:58:17 UTC
Permalink
** Changed in: linux (Ubuntu)
Status: Fix Released => Confirmed
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
Continue reading on narkive:
Loading...